Wood furniture high toxic substances exceed the standard, serious paint workers lack protection

The occupational hazards of China's wooden furniture manufacturing enterprises are very serious, especially the high-toxic substances such as benzene, formaldehyde and aniline are seriously exceeded. Yang Yuanyuan, deputy director of the State Administration of Work Safety, introduced at the symposium on high-toxic substance hazard control work and occupational health law enforcement work held by wooden furniture manufacturing enterprises here. Among the enterprises surveyed, 89% of enterprises exceeded benzene and 76.9% The company's formaldehyde exceeded the standard, 70% of the company's aniline exceeded the standard, the highest exceeded 100 times. For more information, please stay tuned to http:// Xianghe Furniture City official website

Next year, the State Administration of Work Safety should further promote the occupational hazard control of wooden furniture manufacturing enterprises. Yang Yuanyuan revealed that "for enterprises that fail to meet the requirements at the end of March next year, the suspension of production and rectification will be suspended and rectified; by September next year, it will not be achieved. If required, the local people's government should be closed down. The list of enterprises to be closed should be reported to the State Administration of Work Safety before October 15 next year."
According to reports, benzene, formaldehyde, aniline and other high-toxic substances are extremely harmful to the human body, easily lead to poisoning and even death. From May to June this year, the State Administration of Work Safety conducted an investigation on the occupational hazards of wooden furniture manufacturing enterprises, and organized 10 inspection agencies for Guangdong, Guangxi, Guizhou, Yunnan, Jiangsu, Fujian, Shaanxi, Xinjiang, Jilin, Heilongjiang and so on. The 85 wooden furniture manufacturing enterprises in the province (district) conducted on-site inspections. From the survey results and the national situation, the occupational hazard situation of wooden furniture manufacturing enterprises is quite severe.
According to statistics, there are currently more than 35,000 wooden furniture manufacturing enterprises in the country, employing more than 1.6 million people, and the number of people exposed to occupational hazards is nearly 1 million. A considerable number of enterprises have chaotic management on site, unreasonable production layout, and toxic and non-toxic processes intersect. Many small and medium-sized enterprises do not have effective anti-virus facilities installed in the paint booth. Some small enterprises do not even install exhaust fans, and the paint spray room is filled with fog. Most SME painters lack protection against damage, wearing vests, shorts, and even bare feet, bare backs and no effective protective equipment for painting and gluing. Although some workers wear labor insurance products, their quality is not good enough to prevent dust and poison.
Yang Yuanyuan criticized some areas for their lack of understanding of the special actions for the control of dust and high-toxic substances, and paid insufficient attention. For example, some regions and many enterprises did not carry out the governance work according to the requirements; some regions only forwarded the documents and there were no practical and feasible measures; some regional and enterprise special governance work flowed in the form, and did not achieve the expected effect of governance.
Yang Yuanyuan said that it is necessary to think more about dust and toxic and harmful substances that are constantly infringing on the health of workers; think more about how many of our employees have lost their ability to work or lost their lives because of occupational diseases. He stressed that "less need to pull some skins, do more practical work. To enhance the sense of responsibility, take more effective and more effective measures to minimize and control occupational hazards, and protect the health of the majority of workers."

Zinc Shattaf Bidet Spray

Zinc Toilet Spray
Inner packing:Bubble bag,color box,blister packing or according to customers' special packaging requirement.
Outer packing:Packed in standard export carton.

1. Name Toilet High Pressure Chromed Plastic Bidet Hand Spray,Shattaf
2. Model No. sanyin
3. Material

Shattaf: ABS+Zinc Head
Holder: ABS

Hose: Stainless steel pipe, with pvc inner tube,brass or zinc nut

4. Insert Brass or Plastic
5. Color Chrome, Various color can be chosen
6. Water Pressure 5-7 KGS
7. Working Temperature Less Than 80°C
8. Size of Thread 1/2
9. Functions 1 Function
10. MOQ 1000 pcs
11. Fitting for Choose Shower Hose, shower holder,Diverter(Angle Valve & T-adapt)......
12. Package Bulk with bubble bag, color box & blister card & polybag with card & blister with card...
13. Feature Connect with shower hose,hanging by shower holder , Good water outlet Bidet Hand Spray ,Durable use ,easy to install
14. Type Bidet Hand Spray,Shattaf
15. Delivery time Within 25-30days after receiving deposit
16. OEM,ODM OK,Welcome
17. Payment term T/T * ,L/C, MoneyGram, Western Union...

Zinc Shattaf Bidet Spray,Zinc Shattaf Bidet Hand Spray,Zinc Alloy Shattaf Bidet Spray,Shattaf Toilet Bidet Spray

Yuyao Sanyin Bathroom Technology Co Ltd , https://www.chinasanyin.com