[China Wardrobe] [Difficulty] What are the solid wood panels for the wardrobe on the market now? What kind of craft is used in the wardrobes on the spot? (We use the large core board here, and the Boeing film is attached. Some also use fir, Oak brush varnish, then the Osson board is covered with a solid wood veneer varnish or white oil), and a plate similar to a large core board, but the two sides of the veneer part seem to be topcoat and also have a pattern; the middle layer It is Ozon board. How about this kind of board? If you have to make a wardrobe, shoe cabinet, which kind of craft is better! [Question] How to solve the common technical problems in the wardrobe? ã€Best answer】 The materials used to make wardrobes on the market are basically what you said. As for the kind of craftsmanship, it depends on your economic conditions and years of use. 1. The practice of externally attaching Boeing is economical. The disadvantage is that it is easy to break, the service life is short and not beautiful enough. 2, the veneer brush varnish or mixed oil process price is slightly more expensive, but beautiful and durable. 3. The two-sided facing board is a professional furniture board. The characteristic is that the price is moderate and not easy to be deformed, but the interface and the side of the board are not easy to handle. So in summary, make a choice based on your own situation. They can also be used in combination, such as varnish or oil blending on the outside, Boeing film inside, or furniture board. Or other combinations. [Other answers] It is difficult to make live. 1. Because of the process, the on-site environment cannot guarantee the quality of the painting (there is dust adhesion, no brightness and hardness of the baking room); 2, from the material, regardless of the large core board or fir, the surface can not be refined, long time can be discolored, deformed, cracked, unless you pursue the natural effect of the pastoral; 3. If it is really to be produced on site, then the improvement of the construction process, continuous painting and continuous polishing can ensure the effect, but the labor costs will go up. Recommended practice: 1. The style “Ikea†style panel wardrobe, accurate measurement on site and handed to professional manufacturers for production; 2, the material can choose melamine board (multiple colors to choose from, surface wear resistance); 3, the craft factory can avoid the mistake of manual cutting, and the professional heat sealing effect is good. If it is made on site, the edge banding is a problem. 4. The structural hardware is equipped with rafts and “three-in-one†on-site installation.
Fine brush head can be applied to hard-to-reach areas, concealing effect is more even and natural.
Henan Daxin Cosmetic Products Co., Ltd. is a manufacturer of cosmetic brushes that integrates product development, production and sales. The company mainly produces various types of makeup brushes, makeup brushes set, makeup sponges, makeup powder puffs and other products. We have a professional team, rigorous management, and strive to build a well-known brand of Chinese makeup brushes.
Highlight Brush,Highlighter Brush,Contour Highlight Brush,Highlighter Makeup Brush Henan Daxin Cosmetics Co., Ltd. , https://www.dx-cosmetics.com