GORE-TEX(R) Gorethes: Top waterproof breathable fabric Read more >>

GORE-TEX(R)Goldes: Top waterproof breathable fabric

Gore-Tex is a registered trademark of WL Gore & Associates, Inc., USA, a waterproof, breathable fabric invented in 1976 by Wilbert L. Gore, Rowena Taylor, and Robert W. Gore (son of Wilbert L. Gore). Such fabrics are widely used for outdoor clothing such as hiking and warm weather.

Gore-Tex is Gore's flagship product. Its scientific name is polytetraflouroethylene (PTFE), and Gore-Tex is a porous film that needs to be pressed into a layer of nylon material before it can be used as a clothing fabric. Because its pores are smaller than water droplets and larger than water molecules, it is theoretically waterproof and breathable. Through the mesh lining of the underwear, you will see a white colloidal film that is pressed against the nylon material. 3-layer (3-ply) Gore-Tex is a 2-layer material with a layer of breathable material. Because the three layers of fabric stick together, you won't see the Gore-Tex film inside. Its advantage is that the inner layer of fabric can better ensure Gore-Tex film does not wear, but its disadvantage is heavier than the two-layer Gore-Tex, and less breathable; but now some of the top products gore-tex does not exist This shortcoming. Because most of Gore-Tex is laminated on nylon material, your feeling is a layer. The feeling of using Gore-Tex products is waterproof. In general, Gore-Tex has a good overall effect. It is the most commonly used waterproof breathable product. After washing for 24 to 120 hours, general coatings, water-resistant breathable or bonded fabrics lose their waterproof ability, and GORE-TEX® fabrics can maintain their waterproof function after more than 500 hours of washing.

GORE-TEX(R) Brand/Goldes(R) Brand Contact: Affiliation: Gore Industrial Products Trading (Shanghai) Co., Ltd. Contact (Beijing)
Brand Fax (Beijing)
Contact address: 30th Floor, Building A, No. 3, Chaoyangmen North Street, Dongcheng District, Beijing (Beijing Office)/43F, Zhongxin Building, 1468 Nanjing West Road, Shanghai, China Postal Code: 100010

Plywood is a sheet material made from layers of rotary or peeled wood veneer, which are paved perpendicularly with adjacent layers then joint closely by grades of glue and times of hot press.

It`s an effective alternative to solid wood.

Product Name
Bintangor/Okoume / Pine faced Commercial Plywood
Face/Back
Okoume, Bintangor, Poplar, Pine, Pencil Cedar, Ash, etc.
Core 
Poplar, Birch, Eucalyptus, Hardwood, mixed core., etc.
Grade 
BB/CC,BB/BB,C/D,E/F,AAA,AA,A,A/B,DBB/CC or as your requests
Glue
MR, E0, E1, E2, WBP, MELAMINE
Dimension
1220x2440mm, 1250x2500mm,915X1830mm,915X2135mm,915X2440mm,1220X1830mm
or as request etc
Thickness
3-30mm
Tolerance 
≤6mm,,
±0.2mm 
>6mm, ±0.5mm

Ordinary Plywood

Ordinary Plywood,Stable Ordinary Plywood,Bintangor Ordinary Plywood,Ordinary Plywood For Furniture

Shouguang Bailing Wood Industry Co., LTD. , http://www.bailingfurniture.com