FY-10E twisted paper handle making machine (hot glue pasting system)
This is a good machine for making twisted Paper Handle. It pastes the twisted Paper Rope and paper strap together and cut off them for separate handles. It is running stably and fast with hot melt glue application. The handle size can be customized according to customers` request and one machine can make several different handle sizes.
handle length:190mm,152, 114mm
paper strap width:30/40mm
speed:10000 pairs per hour
Paper rope dia: 3-4mm
power:7.8kw
machine weight:1500kg
machine dimension:4200*1300*1500mm
Hot glue pasting system
the sizes can be customized according to the customers' actual needs.
Twisted Paper Handle Making Machine Paper Handle, Paper Twisted Paper Handle Machine, Paper Handle Machine, Paper Handle Machinery. Paper Handle Making Machine DongGuan FeiYang Packaging Machinery Equipment Co., Ltd , https://www.feiyang-machinery.com
Ice cream sticks to match Nordic wood wind storage
Wash the dried ice cream sticks and dry them, then put them up and collect dozens of them. Also need milky white glue, 502 glue, large transparent plastic, saw, large scissors, sandpaper.
[Prepare handmade materials] 
ã€step】
1 glued to the bottom plate and strip
Arrange a certain number of ice cream sticks side by side, fix them with transparent glue, turn over and squeeze 502 glue between the stick and the stick. Two base plates of the same size were produced in the same manner.
Attach two fixing strips to one of the bottom plates in a direction perpendicular to the bottom wooden stick to increase the firmness of the bottom plate. 
2 milky white glue fixing
After the 502 glue of the two bottom plates is dried, a thin layer of milky white glue is evenly applied on the bottom plate to strengthen the adhesion between the ice cream sticks.
Before the white glue is not dried, the two bottom plates are neatly glued together, and some 502 glue can be squeezed into the joint between the two bottom plates to ensure the adhesion is tight.
After the glue on the bottom plate is completely dry, carefully remove the clear adhesive and the bottom plate is finished. 
3 Making columns
Select four flat ice cream sticks, stack them neatly, hold them with clips, and squeeze 502 glue between the stick and the stick. Four columns were fabricated in the same manner.
The two ends of the column are arc-shaped and cannot be bonded to the bottom plate. Therefore, one end of the four columns is sawed separately, and then the bonding place is smoothed with sandpaper. 
4 sticky columns
Apply 502 glue to the polished and smooth column joints, and stick the four columns to the four corners of the bottom plate so that the faces formed by the two columns are perpendicular to each other. 
5 put on the fence, decoration
From the outside, a few ice cream sticks are placed between the two columns as a fence, and the number of fences can be determined as needed.
Apply white glue to all seams. After drying, the simple and practical ice cream stick can be finished. Plug in the small flowers, plus some cute decorations, instantly become super style potted flowers, suitable for sitting in the living room or bedroom. 
[Intimate Tips]
Ice cream stick storage can be large or small, small can be made into a pen holder , large can be made into a CD rack and even a table shelf, according to their actual needs to combine creation.
Be careful when using 502 glue. It is best to use a needle to control the flow to avoid too much sticking to the skin. 