Offset paper price

There are a number of factors related to the selection of offset paper, such as the installation location, power supply, and the coordination with the power distribution system. It is also considered to be the protection configuration for the newly purchased offset paper, or the protection for the offset paper protection, or The improvement of accidental offset paper protection; etc.; also consider the difficulty of changing the protection method of offset paper and the degree of influence on production; it is necessary to comprehensively consider the selection and adjustment of offset paper according to the actual working conditions on site. This article will introduce you to the price of offset paper.

The dry fog offset paper system consists of four major components, including offset paper body, water system, pneumatic system and electronic control. The environmental humidity is detected by the electronic control part, and the coordinated action of the waterway system and the gas path system is controlled, so that the purified water is atomized and sprayed through the offset paper body. The key to atomization is to use the principle of siphon to suck out the liquid to realize gas-water mixing and atomization. The working principle is that the water is supplied to the main body of the offset paper. After the water in the main body is full, the float pushes the water stop valve to close the water supply, and the gas path begins. After the gas source is filtered and regulated by the triple piece, the intake plug is connected through the shut-off valve (the pressure relief solenoid valve can be set in the middle), and then sprayed through the collision nozzle to form two negative pressure zones at the front end of the nozzle to remove the liquid from the air source. The main body of the offset paper is sucked out, and at the same time, the one-time mixing and atomization of the gas and water is realized. Because the nozzle is a collision type, the atomized water sprayed forward after one atomization will collide, and secondary atomization is realized.

The offset paper body is composed of two parts of an offset paper main body and a nozzle.

The main body of the offset paper is a hollow ellipsoid, which is divided into upper and lower parts and screwed together from the middle. The main body is filled with water and float water stopping device. The center of the upper part of the main body is a quick plug for air intake, and the center of the upper part of the main body is at the side of the center. The water quick plug and internal water stop valve, four quick interfaces are arranged around the upper part of the main body, and up to four nozzles or closing caps can be installed. It is no longer necessary to install the closing cap when installing the nozzle.

The nozzle is composed of a nozzle body, a nozzle mouth and a nut. The tail of the nozzle body is connected to the periphery of the upper part of the offset paper main body, the front part is a 120-degree spray type, the top end is inlaid with a wear-resistant material, and the spray nozzle is internally mounted with a nozzle opening, and the end is used. The nut is tightened. A gasket or O-ring is required at the joint of the relevant components, and a filter is required to flow the relevant fluid through the passage.

The water path starts from the water source, and the water filter is used to remove the impurities to prevent the nozzle from being blocked, stored in the pressure tank, and then connected to the offset paper body through the water pressure regulating valve and the (electromagnetic) shut-off valve to realize the water supply.

The electronic offset paper offset paper (adhesive paper offset paper) is characterized by reliable functions, but generally has the disadvantages of complicated structure, inconvenient use and maintenance, large volume and high cost. Here I introduce to you the UL-E2 series offset paper offset paper (adhesive paper offset paper) produced by Ningbo Haishu Julong Electric Factory. This product retains all the advantages of electronic offset paper offset paper (offset paper offset paper), and completely overcomes the shortage of such offset paper offset paper (offset paper offset paper).

Article source address: http://

Corten Steel Sculpture

Weathering steel molding sculpture, landscape, carving, weathering steel rust plate sculpture and landscape walls are common forms. Because of its simplicity and efficiency, many landscape projects are made of this material. The use of weathering steel rust plate sculpture is not only beautiful in appearance, but also practical, and the maintenance cost is relatively low. The color, brightness and saturation of weathering steel rust plate sculpture are higher than those of general materials, and it is easier to highlight in the background of garden plants. Weathering steel rust board sculpture is relatively simple, easy to be shaped into a variety of shapes, and can maintain excellent integrity. The surface of weathering steel rust board sculpture is a layer of rusty red material, which feels very rough and has a very special texture. This special fine oxide layer formed on the surface of weathering steel has a stable and even natural rust red color, making it an attractive material for building exterior walls. Weathering steel rust plate sculpture is widely used in phenomenon decoration. It is a new type of steel that integrates new technology, new data and new strangeness. It is one of the leading steel varieties. Heat treatment of weatherproof steel plate sculpture includes preparation heat treatment, final heat treatment and surface lifting. General heat treatment defects refer to various defects of weathering steel plate sculptures in the final heat treatment process or later production process and use process, such as quenching cracks, deformation deviations, unqualified hardness, laser cutting cracking of metal materials, drilling cracks, early damage of weathering steel plate sculptures, etc. The following are detailed instructions on cracking and hardness.

Why is corten steel so popular?

Packing&Shipping

About mobile steel storage tool cabinet packaging and shipping
We handle in a careful and economic way for ocean shipping, like paper box,pallet,or carton. Package size and
container loading quantity are calculated by engineers based on products size in order to work out a best solution.
Every piece is fixed by protective foam,plastic tape,batten etc. to protect products from shipping damage.

Corten Steel Sculpture,Corten Sculpture,Rten Steel Artist,Corten Steel Artwork

Henan Jinbailai Industrial Co.,Ltd , https://www.designsteelarts.com